Terk TRINITY XTEND TURBO Guía De Configuración página 11

WIFI EXTENDER SETUP with the APP
iPhone screen
s the
MAKE A NOTE
If you change your Xtend's name and password, make
sure to make a note of it so that you don't forget.
You'll need this name and password to connect your
streaming devices to it!
IMPORTANT: Screenshots are for illustration purposes
only—your phone/tablet's screens might look different.
Android screen
(continued)
The next screen lets you change the name
and password of the Xtend from what's
listed on the bottom of the Xtend to a
name and password of your choice (like
"upstairs-xtend," for example). This step is
optional but recommended.
Just tap on each area, delete the old name
and password, and type new ones. Then
press NEXT to continue.
Notes:
• The Xtend adds "5G" to the name you give
here to indicate the 5GHz band. For example,
if you use the name "myXTEND," it will show
up as "myXTEND-5G" for the 5GHz band and
"myXTEND" for the 2.4GHz band. Both bands
use the same password.
• If you want to customize the Xtend's name
and password later, simply go through the App
setup again later.
11