Chauvet DJ Foot-C Guía De Referencia Rápida página 4

Ocultar thumbs Ver también para Foot-C:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
Foot-C™ QRG
Control Descriptions
Button or Fader
<Fixture 1>–
<Fixture 6>
Blackout
Program
Delete
Color/Control
Knobs
Audio
Sensitivity Knob
LCD Displays
<MODE> Pedal
Button
<UP> Pedal
Button
<DOWN> Pedal
Button
<FUNCTION
(ENTER)> Pedal
Button
<MUSIC/AUTO/
BLACKOUT>
Pedal Button
Buttons that select lights to control and set the default DMX addresses of the
channel faders. The corresponding LEDs indicate when a light is selected.
Note: These buttons are inclusive. Pressing one, then another, selects both
lights. To deselect a light, press it again and make sure the LED indicator is
off.
The <Blackout> button will darken all fixtures. To turn blackout off, press the
<Blackout> button again. The <MUSIC/AUTO/BLACKOUT> pedal will also
activate and deactivate the blackout feature.
Button used to enter the programming mode. Allows you to program a scene,
chase, or sequence there of.
Button used to delete scenes individually. Delete a scene by pressing and holding
the <Delete> button until the LED display flashes. <Delete> button also controls
the MIDI channel select.
Knobs to control the manual adjustment of red, green, blue, amber, white and UV
(000–255); or the DMX channel of the Fixtures 1–6.
Knob that adjusts the board's sensitivity to sound and music.
Display that shows various types of information about current selections and
whether it is in Program or Playback mode:
·
Blackout - indicates that blackout is active and the board is not sending DMX
signals.
·
Program - indicates that the board is in Program mode.
·
Music - indicates that the board is in Music Trigger mode.
·
Auto - indicates that the board is in Auto Trigger mode.
·
Chase - shows the current chase in Playback or Program mode.
·
Scene - shows the current scene in Playback or Program mode.
Button that switches between Chase mode and Scenes mode. Hold to activate
the Tap Sync feature.
Button that moves up through banks of scenes, or up through the steps in a
chase.
Button that moves down through banks of scenes, or down through the steps in a
chase.
Button used while programming to switch between the Speed and Fade
functions, or to confirm a selection.
Button used in playback to quickly switch between Music mode, Auto mode, or to
blackout all fixtures.
·
To turn the blackout off, you must press and hold the
<MUSIC/AUTO/BLACKOUT> pedal button again.
·
While in Tap Sync mode, press the <MUSIC/AUTO/BLACKOUT> pedal
button to the beat to set your chase timing.
Description
4
EN

Publicidad

Tabla de contenido
loading

Tabla de contenido