Foot-C™ QRG
EN
AC Power
This product has an auto-ranging, external power supply that can work with
an input voltage range of 100 to 240 VAC, 50/60 Hz; it runs on
12 VDC, 500 mA.
Never connect the board to a rheostat or dimmer circuit.
DMX Polarity
Switch
Diagram
All Chauvet lights use a negative pin 2 and positive pin 3, so the polarity
switch should be set as shown above—towards the DMX Control Out port.
Other manufacture's lights might be different. See the individual light's User
Manual for specific information
For more information about DMX, download the DMX Primer from
www.chauvetlighting.com.
5