Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTION MANUAL
Process Controller
Probe pT100
Probe termocouple K type
Model:
Power supply:
Electrical power:
Weight (Kg):
External Fuse:
Timed operation:
Temperature Profiles:
Data recording:
External dimensions H x W x D (cm):
Temperature reading range
Stability 0-100ºC / other ranges:
Resolution:
Working mode:
J
.P. SELECTA s.a.u.
CODE 80080 REV L
1. General Information
•
Handle the parcel with care. Unpack and check that the contents coincide with
the packing-list. If any part is damaged or missing, please advise the distributors
immediately.
•
Do not install or use the equipment without reading this handbook first. This
instruction manual must be attached to the equipment and must be available for all
users.
•
If you have any doubts or enquiries, contact with J.P. SELECTA's technical service.
•
Do not use the equipment in explosive, flammable or corrosive atmospheres.
2. Packing list
3000897
3. Accesories
1000893
1000895
4. Technical specification
(voltage as indicated on the equipment label)
3000897
230 VAC 50/60Hz
3100W
1.25
Replaceable (Type: 10x5mm) 15A
Weekly, hour, minute
Up to 10 profiles of 6 segments. Segment from 1minute to 99hours.
By USB memory device and Serial RS-232
10.5 x 13.5 x 21
-150ºC to + 1300ºC * (depends on the type of probe connected)
+ -0,1ºC / + -1,0ºC
+ -0,1ºC PT100 probe/ + - 1ºC K probe
Cold / heat
Autovía A-2 Km 585.1 Abrera 08630 (Barcelona) España
e-mail: selecta@jpselecta.es - website: http://www.jpselecta.es
MAY 2019
(It can be modified without notice)
Page: 14
110 VAC 50/60Hz
1650W
Tel 34 937 700 877 Fax 34 937 702 362
Publicidad
Tabla de contenido
