Use; Charging The Battery - Imetec L6901 Instrucciones Para El Uso

EN
7A. Plug technical data
7B. Plug output connector
7C. Plug
For the appliance features, refer to the external packaging.
Use only the supplied accessories.
PREPARATION
• Remove the charging base (2), the handpiece (1) and the plug (7)
from the packaging.
• Fully charge the battery before using the appliance for the first time.

CHARGING THE BATTERY

• Insert the handpiece (1) into the charging base (2) making sure the
charging pins of the handpiece (1D) match the base charging pins
(2B) (fig. A).
• Insert the plug output connector (7B) in the base charging connection
(2C).
• Insert the plug (7C) into an electrical outlet: the operating and charging
LED (1B) will begin to flash to indicate that the appliance is charging.
• The appliance is fully charged and ready for use when the operating and
charging LED (1B) remains on. This operation can take up to 3 hours.
• Disconnect the plug output connector (7B) from the charging connection
(2C): the operating and charging LED (1B) will go off.
• When the battery must be recharged, charging LED (1B) goes on
and off to indicate that the appliance is about to switch off.
The appliance has a capacity of about 60 minutes at intensity 1 and about
40 minutes at intensity 2.
Never cover the appliance (1,2) and the plug (7) while charging!
ATTENTION! For an ideal battery life, it is recommended
to charge it regularly, and in any case at least every
6 months.
34

USE