Gradual Up/Down - Oqan QPD-10 Manual De Instrucciones

Practicing in Coach Mode

Gradual up/down

In gradual up/down type, you can see how fast you
can go and still maintain accurate timing.
Practicing with metronome in all sorts of time
signature and intervals.
As you play along with a metronome, the drum will
automatically increase the tempo if your timing is
good and decrease it if not.
There are two training ways in this type:
G-1: The tempo will auto decrease or increase 5 BPM
depend on your timing accuracy every 4 measures.
1. If you have hit above 80% beats correctly in 4
measures, the tempo value will increase 5 BPM.
2. If you have hit between 40% to 80% beats correctly
in 4 measures, the tempo won't change and keep its
value.
3. If you have hit lower than 40% beats correctly in 4
measures, the tempo value will decrease 5 BPM.
G-2: The tempo will increase or decrease by 1BPM
each measure.
In G-2, you can set initial tempo value before practice.
During tempo increasing, it will turn back to decrease
by pressing the [TEMPO] button.
You can practice like this.
1. In coach mode, press the [2] button to enter this
type.
2. Press the [START/STOP] button to enter Gradual
Up/Down preparation. The LED of the [START/STOP]
button starts flashing.
3. Press the [1] button to choose G-1 type, or press
the [2] button to choose G-2 type.
Set time-signature and interval you want to practice.
Please refer to the "Setting the metronome" chapter
for metronome parameter settings.
4. Press the [START/STOP] button to start gradual
up/down practicing.
The current tempo value will be displayed on the
3-digit LED.
Your hitting accuracy will be indicated by the 6 LEDs
on the bottom of the drum module.
5. Press the [START/STOP] button to stop gradual up/
down practicing.
For example: G-1 practice
1. Select the Gradual Up/Down type.
Press the [PATTERN] and [TEMPO] buttons
simultaneously to enter Coach mode.
Press the [2] button to select gradual up/down type.
16
Press the [START/STOP] button to enter preparation.
Press the [1] button to select "G-1" training.
2. Select your desired time signature, interval and
tempo.
Press and hold the [CLICK] button, then click the [2]
button to call
up the time signature page. Press the [+] button or [-]
button to select time signature "4-4".
Press and hold the [CLICK] button, then click the [3]
button to call
up the interval page. Press the [+] or [-] button to
select interval "4".
Press the [TEMPO] button, and then press the [+] or
[-] button to adjust the current tempo to 60 BPM.
3. Practicing with G-1
Press the [START/STOP] button to start practicing
with 4/4 and 60 BPM.
The tempo will auto increase 5BPM depending on
your accuracy every 4 measures.
Your hitting accuracy will be indicated by 6 LEDs on
the bottom of the drum module.