Performing; Operation Feature; Playing The Pads; Selecting A Drum Kit - Oqan QPD-10 Manual De Instrucciones

Operation Feature

• Enter the Volume Page
Double click the corresponding buttons, enter the Volume pages.
For example:
Double click the [PATTERN] button to enter pattern volume page.
Double click the numeric button [1] ~ [5] to enter kit volume page.
Double click the [CLICK] button to enter click volume page.
• The numeric buttons (1~5) can be used as a combination
with other buttons.
In kit mode, combine the numeric buttons (1~5) with the
[VARIATION] button to select a kit.
In Coach mode, the numeric buttons (1~5) can be used to select
a coach type.
Combine the numeric buttons (1~3) with the [CLICK] button to
select the click parameter menu.

Playing the Pads

Similar to an acoustic drum kit, the digital drum responds differently to
various playing techniques and dynamics. All the pads are velocity
sensitive, and some voices change timbre depending on the striking force.
Hi-Hat
The Hi-Hat sounds varies from open to closed in response to how far the
Hi-hat pedal is pressed:
Open Hi-Hat: Strike the Hi-Hat pad without pressing the
pedal.
Closed Hi-Hat: Strike the Hi-Hat pad with the pedal pressed
completely down.
Pedal Close: Press the pedal completely down without
striking the pad.
Splash: Press the pedal completely down and release it
immediately.

Selecting a Drum Kit

After the power is turned on, the digital drum displays the KIT menu.
As the picture shows:
1. There are 10 preset kits for your choice.
The [VARIATION] button LED remains in red: select kit 1~5 by the numeric
button 1~5.
The [VARIATION] button LED remains in green: select kit 6~10 by the
numeric button 1~5.
2. Hit the pads to play the current kit.

Performing

Click Twice
7