Follow Me - Oqan QPD-10 Manual De Instrucciones

Practicing in Coach Mode
For example: Practice in P-1
1. Select the Change Up.
Press the [PATTERN] and [TEMPO] buttons simultaneously
to enter Coach mode. Press the [3] button to select change
up type. Press the [START/STOP] button to enter preparation.
Press the [1] button to select "P-1" training.
2. Select your desired tempo.
Press the [TEMPO] button, and then press the [+] or [-] button
to adjust current tempo to 60 BPM.
3. Practicing with P-1
Press the [START/STOP] button to start practice. Your hitting
accuracy will be indicated by the 6 LEDs on the bottom of the
digital drum.
After one cycle, the practice will stop automatically. Your score
will be displayed on the 3-digit LED , and you will hear your
comment.

Follow Me

In follow me type, there are 12 drum-loops from easy
to hard level. (Please refer to the Loop List and the
Drum Score manual.)
These loops play circularly: once sound out, and
once muted. So you can listen and memorize when it
sound out, and you can hit by yourself when it muted.
By this training, you can distinguish each kind of
drum more accurately. The hitting accuracy and your
memory can be also advanced.
You can practice like this:
1. In coach mode, press the [4] button to enter this
type.
2. Press the [START/STOP] button to enter FOLLOW
ME preparation .
The LED of the [START/STOP] button starts flashing.
3. Select drum loops you want to practice by pressing
the [+] or [-] button.
4. Press the [START/STOP] button to start practicing.
When current loop sound out, it will display "1-2-3-4",
when it muted, it will display "F-1, F-2, F-3, and F-4".
Your hitting accuracy will be indicated by the 6 LEDs
on the bottom of the drum module.
Note:
You can't change drum-loops when you are
practicing.
5. Press the [START/STOP] button again to stop
practicing.
For example: Practice in 001. 1. Select the Follow Me.
Press the [PATTERN] and [TEMPO] buttons
18
simultaneously to select Coach mode. Press the [4]
button to select follow me type. Press [START/STOP]
button to enter the preparation. Press the [+] or [-]
button to select loop 001.
2. Practicing with 001.
Press the [START/STOP] button to start practicing.
Press the [START/STOP] button again to stop
practicing.Your hitting accuracy will be indicated by 6
LEDs on the bottom of the drum module.