Intended Use; Assembly And Adjustments - DeWalt D28111S Manual De Instrucciones

All manuals and user guides at all-guides.com
• The label on your tool may include the following symbols. The
symbols and their definitions are as follows:
V ............ volts A ............amperes
Hz .......... hertz W ...........watts
min ......... minutes
n o ...........no load speed
....... direct current
........... Class I Construction
............... (grounded)
............ Class II Construction .../min ....revolutions or
............... (double insulated) ...............reciprocation
BPM....... beats per minute
sfpm ...... surface feet
.............. per minute (sfpm)
DESCRIPTION (FIG. 1)
WARNING: Never modify the power tool or any part of it.
Damage or personal injury could result.

INTENDED USE

Your angle grinder has been designed for professional grinding and
cutting applications.
DO NOT use under wet conditions or in presence of flammable
liquids or gases.
DO NOT use grinding wheels other than center depressed wheels
and flap-disk.
This heavy-duty angle grinder is a professional power tool. DO NOT
let children come into contact with the tool. Supervision is required
when inexperienced operators use this tool.
A. Paddle switch D. Guard
B. Lock-off lever E. Side handle
C. Spindle lock
..........alternating current
...........earthing terminal
...........safety alert symbol
..............per minute

ASSEMBLY AND ADJUSTMENTS

tool.
Mounting and Removing the Guard
(Fig. 2)
adjustments or removing or installing attachments or
accessories. Before reconnecting the tool, depress and release
the paddle switch to ensure that the tool is off.
8
FIG. 1
D
C
WARNING: Prior to assembly and adjustment, ALWAYS unplug
WARNING: Never use the tool without the guard in place.
WARNING: Turn off and unplug the tool before making any
1. Place the angle grinder on a table, spindle up.
2. Align the lugs (F) with the notches (G).
B
A
E