XYZ Printing Da Vinci nano w Guía Rápida página 8

Software Functional Descriptions
Interface Introduction
Extruder
Once this function is
selected, the nozzle will
heat up automatically and
move the nozzle to a proper
location where you can
easily clear away all residual
Clean
plastic on the nozzle.
Nozzle
The extruder module
information, including
Temperature, Nozzle
Diameter, Total Print Time,
and Serial Number.
Info
Extruder Filament
Load
Filament
Unload
Filament
Info
SetUp
Filament
Please follow the on-screen
instructions.
The extruder module will
automatically move to
the working position. The
nozzle will then heat up
and begin the filament
loading process. After this is
complete, verify that plastic
has been extruded. If not,
please repeat the filament
loading process.
Please follow the on-screen
instructions.
The printing module will
automatically move to the
working position. The nozzle
will then heat up and begin
the filament unloading
process.
Information related to
filament use.
8