Additional Safety Precautions - Hilti SIW 18T-A Manual De Instrucciones

metal objects, that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns or a
fire.
d) Under abusive conditions, liquid may be ejected from the battery,
avoid contact. If contact accidentally occurs, flush with water. If
liquid contacts eyes, additionally seek medical help. Liquid ejected
en
from the battery may cause irritation or burns.
5.1.6 Service
a) Have your power tool serviced by a qualified repair person using
only identical replacement parts. This will ensure that the safety of the
power tool is maintained.

5.2 Additional safety precautions

5.2.1 Personal safety
a) Hold power tool by insulated gripping surfaces, when performing an
operation where the fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal parts of the power
tool "live" and could give the operator an electric shock.
b) Wear ear protectors. Exposure to noise can cause hearing loss.
c) Breathing protection must be worn if the power tool is used without
a dust removal system for work that creates dust.
d) Improve the blood circulation in your fingers by relaxing your hands
and exercising your fingers during breaks between working.
e) Avoid touching rotating parts. Switch the power tool on only after
bringing it into position at the workpiece. Touching rotating parts,
especially rotating insert tools, may lead to injury.
Activate the safety lock (forward / reverse switch in the middle
f)
position) before storing or transporting the power tool.
g) Children must be instructed not to play with the power tool.
h) The power tool is not intended for use by children, by debilitated
persons or those who have received no instruction or training.
WARNING: Some dust created by grinding, sanding, cutting and
i)
drilling contains chemicals known to cause cancer, birth defects,
infertility or other reproductive harm; or serious and permanent
respiratory or other injury. Some examples of these chemicals are:
lead from lead-based paints, crystalline silica from bricks, concrete
and other masonry products and natural stone, arsenic and chromium
from chemically-treated lumber. Your risk from these exposures varies,
depending on how often you do this type of work. To reduce exposure
to these chemicals, the operator and bystanders should work in a
well-ventilated area, work with approved safety equipment, such as
10
Printed: 27.08.2013 | Doc-Nr: PUB / 5136086 / 000 / 01