Description - Hilti SIW 18T-A Manual De Instrucciones

2 Description

2.1 Use of the product as directed
The SIW 18T­A is a hand-held cordless impact wrench. It is suitable for
tightening and releasing nuts, bolts, anchors and wood screws.
en
Working on materials hazardous to the health (e.g.
permissible.
Nationally applicable industrial safety regulations must be observed.
Do not use the battery as a power source for other unspecified appliances.
Modification of the power tool or tampering with its parts is not permissible.
To avoid the risk of injury, use only genuine Hilti accessories and insert
tools.
The power tool should not be used for applications that require a precise
torque. For applications which require a precise torque or where only a
special limited torque is permitted, there is a risk of over-tightening and
damage to the screw or workpiece. For these types of application, use a
tool with a predefined torque setting to prevent over-tightening.
Observe the information printed in the operating instructions concerning
operation, care and maintenance.
The power tool is designed for professional use and may be operated,
serviced and maintained only by trained, authorized personnel.
personnel must be informed of any special hazards that may be encountered.
The power tool and its ancillary equipment may present hazards when used
incorrectly by untrained personnel or when used not as directed.
The working environment may be as follows: construction site, workshop,
renovation, conversion or new construction.
2.2 Chuck
½" square drive with ball-notch retention
¾" square drive with locking pin
2.3 Switches
Control switch with electronic speed control
Forward / reverse selector switch with safety lock
2.4 The items supplied include (toolbox versions):
1 Power tool
1 Operating instructions
1 Hilti toolbox
4
Printed: 27.08.2013 | Doc-Nr: PUB / 5136086 / 000 / 01
asbestos) is not
This