Operation - Fermax 2260 Manual De Instalación

OPERATION

The PRIVATE KIT is equipped with a personal proximity card reader, able to
control up to 400 cards. The Kit comes supplied with 6 cards.
Each of these cards, which function with no need for any type of maintenance,
comes with an electronic code unique in the world (there are no two cards with
the same number).
Once activated, they can be used to open the access door to be controlled.
To do so, all you have to do is show the card (momentarily)to the proximity
reader.
As they work by radio frequency, no physical contact is necessary, and the
card may even be shown without being removed from your wallet.
The maximum reading distance is 8 cm.
The proximity reader is equipped with luminous indicators, whose meanings
are as follows:
+ -
+ -
When an activated card is shown to the
reader, the door opens and the green
indicator lights up . A confirmation "beep" is
heard.
In order to be able to use the personal proximity cards, the proximity card
reader must be activated.
Pag 12
+ - No power supply.
- +
- Reader deactivated. The MASTER card has not been activated
+ -
MASTER card change mode.
-
+ Activate Card mode
-
+ Deactivate Card mode
-
+
Door release activation time configuration mode
-
Door open time configuration mode
+
Normal mode. Door closed.
+
+ -
Normal mode. Door opened.
-
Overflow. Attempted activation of more than the 400 cards permitted .
+
Beep!
+ -
+ -
When a non-activated card is shown to the
reader the door does not open and the green
indicator does not light up. A rejection "double
beep" is heard.
.
Beep!
+ -