Breitling EXOSPACE B55 Guia De Inicio Rapido página 4

a) the notifications for phone calls, emails, messages (SMS, WhatsApp) and calendar events
are activated on the smartphone. For Apple iPhone
the Settings menu ž "Mail, Contacts, Calendars" ž New data ž Activate "Push".
b) the notifications are activated on the watch through the application "EXOSPACE".
5. Updating the watch firmware
The watch firmware can be updated through the application. If need be, the application
will inform the user of this option. In this event, it is recommended that the smartphone
and the watch be charged prior to proceeding with an update. This will last between
10 and 20 minutes. During this time, it is important not to interrupt the communication
between the watch and the smartphone: the watch must remain close to the
smartphone.
During the update, a window in the application will provide a progress report. On the
watch, the hands will be stopped and the digital display blocked. The watch will restart
automatically at the end of the update, but it must be synchronized once again and the
settings adjusted (time, date...).
6. In the event of problems – Resetting the watch
If the watch no longer responds or in the event of connection issues with the smart-
phone, the watch may require resetting, as follows:
• Select the function by turning the crown.
BATTERy
® , the emails need to be activated in
3
• Pull the crown to position 2; the upper screen displays
select by turning the crown.
DEEP SLEEP
• Give P1 a 2 seconds press to confirm the extended standby. The hands will park imme-
diately. Once the procedure is finished, the display turns off and the electronics are
disconnected.
• Do not forget to push to crown back to neutral position 1.
• To reactivate the watch, connect the charger cable. The watch is thus reset. All settings
will be lost after this operation.
NOTE: If the watch has been reset (battery completely discharged or after a
), it must be unpaired from the smartphone before doing a new connection. This
SLEEP
is usually done in the Settings/Parameters menu ž Bluetooth menu of the smartphone.
Please also note that after a reset, the Bluetooth
SETTING ž CONNECT ž ON.
or
DEEP SLEEP SOFT SLEEP
DEEP
®
on the watch has to be reactivated ž
4
;