BH FITNESS R309 Instrucciones De Montaje Y Utilización página 15

4.- MOUNTING THE ALUMINIUM
RAIL.-
Insert aluminium
direction indicated by the arrow, into
the central frame (1) Fig.2.
Insert screws (38) with washers (39)
Fig.2 and then firmly tighten with the 6
mm Allen wrench.
5.- MOUNTING THE SEAT.-
Once the aluminium rail has been
assembled, insert seat (27) in rail (2),
in the direction indicated by the arrow,
as shown in figure Fig.2.
Insert the seat
mounting screws (40) together with
the end caps (26) and then firmly
tighten with the 6mm Allen wrench.
Mount end caps (21) and (22) at the
end of the aluminium rail as shown in
Fig.2.
6.- MOUNTING THE REAR
SUPPORT.-
Position rear support (3) on the bottom
of rail (2), Fig.3.
and washers (39) and then firmly
tighten with
wrench.
7.- MOUNTING THE
ELECTRONIC CONSOLE.-
Remove the insulating strip located on
the back of the monitor (32) for
batteries make contact and make sure
the monitor is turned on.
Position the electronic console (32)
next to the seat in the main frame (1)
Fig.5.
Connect the console terminals (32),
with the terminals running from the
main frame (1) Fig.5A, and insert the
rail (2) in
travel stops
Insert screws (38)
the 6mm Allen
console in the seat in the main frame
(1) Fig.5, taking care with the cables.
the
LEVELLING.-
Once the unit has been placed into its
final position for doing exercise, make
sure that it sits flat on the floor and
that it is level. This can be achieved by
screwing
blocks (24) up or down, as shown in
Fig.6.
MOVEMENT & STORAGE.-
The unit is equipped with wheels (14)
by
to make it easier to move. The wheels
located at the front of your unit make it
easier to move it into a chosen
position, by lifting the rear of the unit
up slightly and pushing it, as shown in
Fig.4. Store your unit in a dry place,
preferably not subject to changes in
temperature.
MAINS CONNECTION.-
Insert the jack (m) for the transformer
into the connection hole on the main
body (k) (bottom, rear of the machine)
and then plug the transformer (6) into
a 230 V mains supply, Fig.6.
Do not hesitate to get touch with the
Technical Assistance Service if you
have any queries by phoning customer
services (see last page in manual)
BH RESERVES THE RIGHT TO
MODIFY THE SPECIFICATIONS OF
ITS PRODUCTS WITHOUT PRIOR
NOTICE
15
the adjustable support