Num'axes CANICALM SMART Manual De Uso página 25

Collar de perro anti ladridos
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Description of the product
Fig. 1
Repère
location of the magnetic switch for switching
the collar on and off and for selecting the
modes
Technical specifications
Power
Battery life
Battery waste indicator
Tightness
Operating modes
Dimensions
Weight (with battery)
Strap
Temperature limitations
Frequency bands
Max powers
Bluetooth
Fitting the battery in the collar
Unscrew the battery cover using a coin.
Remove the protective film around the battery.
Insert the battery paying attention to follow polarity indicated under the collar (see Diagram 1).
-
Screw on the battery cap with a coin. A beep sound is emitted indicating correct placement of the battery. If you do not hear
any beep sounding the cap, remove the battery from the slot immediately. Check the polarity before re-inserting. The
indicator lights come on. Wait until they turn off to turn on the collar.
If you do not hear any beep sound when retightening the battery cover, remove the battery immediately from its housing.
Check the polarity before trying again.
Activate/Deactivate the collar
Activate: put the magnetic key in contact with the mark
Diagram. 3). A beep is emitted and the collar indicator light turns on and flashes red and blue (Bluetooth LED) (1 red flashing
and 1 blue flashing alternately): the CANICALM Smart collar is on.
Deactivate: move the magnetic key towards the collar so that it comes into contact with the red mark, hold for 1 second
(See Diagram 3). Two beeps are emitted and a red light on the collar turns on and off: the CANICALM Smart collar is off.
To preserve the battery, it is recommended to put the collar out of service (using the magnetic key) as soon as you do
not use it anymore.
Diagram 3
Activate/deactivate the collar
with the magnetic key
Magnetic
Guide d'utilisation version complète – User's guide full version CANICALM Smart – indice B
Contact points
(short or long)
:
1 Lithium 3-V CR2 battery
approximately 51 days
light and sound indicators
waterproof
4
60 mm x 35 mm x 37 mm
68 g (without the strap)
adjustable to neck sizes from 17 cm to 55 cm
between – 20°C and + 40°C
2402 MHz
0 dBm EIRP
BT LE
key
Bark
detection
contact point
Indicator light:
On/Off indicator
+
battery level indicator
+
setting / not setting the
collar time indicator
+
Bluetooth indicator
located on the front of the collar for a minimum of 1 second (see
Fig. 2
Battery
cover
Battery polarity indicator
WARNING
When inserting the battery, make sure
to follow polarity indicated on the
collar
25/100

Publicidad

Tabla de contenido
loading

Tabla de contenido