Canon PIXMA MG3000 Serie Guia De Inicio Rapido página 3

ENGLISH
Getting Started 2
• If the connection of your smartphone/tablet is complete in
no need for the setup using this manual.
• You need connection setup for each smartphone/tablet. Repeat the setting from step 1 for
another smartphone/tablet as necessary.
Preparation
• Turn on Wi-Fi on your smartphone/tablet.
• If you have a wireless router, connect your smartphone/tablet to the wireless router.
• For operations, refer to manuals of your smartphone/tablet and the wireless router or contact
those manufacturers.
1. Install Canon PRINT Inkjet/SELPHY to your smartphone/tablet.
: Search "Canon PRINT" in App Store.
: Search "Canon PRINT" in Google Play.
2. Check the status of the Wi-Fi lamp on the printer.
The lamp is lit:
The lamp is flashing or
turned off:
3. Tap PRINT which was installed.
Follow the on-screen instructions to proceed to the setting.
4. If the following screen appears, the setup is complete.
QT6-1650-V01 XXXXXXXX
ESPAÑOL
in the Getting Started 1, there is
PRINTED IN XXXXXXXX
© CANON INC. 2016
2
3. Tap Settings on the home screen of
your smartphone/tablet, and then tap
Canon_ij_XXXX on the Wi-Fi setting.
If Canon_ij_XXXX does not appear on
the list, see "Troubleshooting" below to
operate the printer and wait until Canon_
ij_XXXX appears.
XXXX varies depending on your printer.
4. Tap PRINT which was installed.
Follow the on-screen instructions to
proceed to the setting.
5. If the following screen appears, the
setup is complete.
Troubleshooting
a Press the Wi-Fi button (A) for 2 seconds.
The Wi-Fi lamp (B) flashes slowly.
b Press the Color button (C) twice.
c Return to - 3 to proceed with the setup.
3. Tap PRINT which was installed.
If the message "Printer is not registered.
Perform printer setup?" does not appear
for a while, see "Troubleshooting" below
to operate the printer and wait until the
message appears.
Follow the on-screen instructions to
proceed to the setting.
4. If the following screen appears, the
setup is complete.
(A)
(B)
(C)