Kalorik USK BL 24088 Manual Del Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT INFORMATION
This appliance is not for professional use. You should follow the
requested breaks. Failure to follow this instruction carefully may result
in damage to the motor. The maximum continuous usage time is 10
seconds. After 10 seconds of continuous use, you should insert a
break of at least 3 seconds.
Don't make this unit work continuously more than one minute. Stop
working when the outer housing becomes hot. In order to prolong
the life of the unit, please continue to use this unit only when it has
cooled down.
The unit has a motor-protecting device. The power is automatically
switched off when the temperature of the motor is too high. The
blender can resume operation automatically after it has cooled
down (approximately after 15 minutes).
ASSEMBLY OF THE BLENDER AND USE
NOTE: Do not operate with nothing in the cup. Water or other liquids
must be added, with a maximum total volume of 500ml /16 ½ Fl. Oz.
Assemble the pouring jar on the motor block and make sure it is
correctly positioned; otherwise the appliance will not work.
Position the jar vertically above the motor block and turn
counter-clockwise to lock it in place.
Remove the lid of the blender.
Fill the pouring jar with the chosen ingredients.
Close the lid.
Plug in the appliance.
The switch has to be kept on manually for the blender to operate.
Do not operate more than 10 seconds at a time, pause for 3
seconds after each cycle.
By switching on and off quickly, you create a pulse. This is
generally used to crush ice in order to avoid damages on the
blades, but it can also be used to complete the mixing.
5
USK BL 24088 BL 25887 - 100603

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Usk bl 25887

Tabla de contenido