D escription du boîtier
2
C harging the battery
3
The device contains a rechargeable battery; immediately following purchase, simply charge
it for 3 hours by plugging the main module into the mains power supply.
connect the charger provided to the rear of the master unit.
Whilst the battery is charging, the bars on the two bar graphs light up successively one
after the other, indicating that the charging is in progress.
Once the battery is charged, the 2 bar graphs fl ash at the same time.
When the charger is unplugged, the indicator goes out.
It is not possible to use the device whilst the battery is charging.
If the device remains unused, charge the battery for 3 hours every 4 months.
Automatic stop function:
The device turns itself off after 5 minutes of inactivity if:
No keys are pressed.
No impulse is delivered.
Q uick function test
4
Test the device on your biceps:
Connect an adhesive electrode to each module. Place the electrodes on your skin
f
f
Switch on your device and select the program n°2.
f
f
Gradually increase the power. You will begin to feel contractions, the device is working.
f
f
14
- USER MANUAL
A
MAIN MODULE
1. ON/OFF key /emergency stop key.
2. Program selection key.
3. Control screen (see below).
4. Main module increase power key (level 0 to 64).
5. Main module decrease power key (level from 64 to 0).
B
SECONDARY MODULE
6. Modules connection lead (~70cm, micro USB plug)
7. Secondary module increase power key (level 0 to 64).
8. Secondary module decrease power key (level from 64
to 0).
C
CONTROL SCREEN
1. Program indicator.
2. Main module power level indicator.
3. Secondary module power level indicator.
Checking the battery level:
Battery level low: bar n
6 on the bar graph fl ash.
o
Battery level critical: bar n
o
10 on the bar graph fl ash,
then the devices turns itself off .