Playing A Bluetooth Device; Searching And Playing Tracks - Sony XAV-68BT Manual De Instrucciones

Playing a BLUETOOTH Device

You can play contents on a connected device that
supports BLUETOOTH A2DP (Advanced Audio
Distribution Profile).
1
Make BLUETOOTH connection with the
audio device (page 8).
2
Reduce the volume on this unit.
3
Press HOME, then touch [BT Audio].
4
Operate the audio device to start
playback.
5
Adjust the volume on this unit.
Playback controls
If the BLUETOOTH device supports AVRCP (Audio
Video Remote Control Profile), you can control
playback via this unit in the same way as disc
playback.
To match the volume level of the
BLUETOOTH device to other sources
You can reduce the volume level differences
between this unit and the BLUETOOTH device.
During playback, touch
Select a level from –10 to +15.
12
GB
.

Searching and Playing Tracks

Using repeat play and shuffle play
1
During playback, touch
(shuffle) repeatedly until the desired
option appears.
Repeat or shuffle play starts.
Available play modes differ depending on the
selected sound source.
Note
Repeat play and shuffle play are not available for
version 2.0 VCD with PBC function.
Using direct search play
1
During disc or USB playback, press the
number buttons on the remote
commander to enter an item (track,
chapter, etc.) number, then press ENTER.
Playback starts from the beginning of the
selected point.
Note
During VCD playback, this function is available only
when playing a VCD without PBC functions.
Searching for a file from the list screen
1
During disc or USB playback, touch
The list screen from the currently played item
appears.
Furthermore, touch
the file type (audio/video/photo).
2
Touch the desired item.
Playback starts.
(repeat) or
, or to list up by
.