Playing A Bluetooth Device; Searching And Playing Tracks - Sony XAV-602BT Manual De Instrucciones

Listen and watch contents with direct
operation of iPod (Passenger App
Control)
1
During playback, touch
To deactivate Passenger App Control
During [Passenger App Control], touch screen and
then [Cancel].
The play mode changes to resuming mode.
Notes
 App image and video can only be displayed on this
unit while the parking brake is applied.
 Apps compatible with Passenger App Control are
limited.
 The volume can be adjusted only by this unit.
 The repeat and shuffle settings will be off if the
Passenger App Control mode is canceled.

Playing a BLUETOOTH Device

You can play contents on a connected device that
supports BLUETOOTH A2DP (Advanced Audio
Distribution Profile).
1
Make BLUETOOTH connection with the
audio device (page 9).
2
Reduce the volume on this unit.
3
Press HOME, then touch [BT Audio].
4
Operate the audio device to start
playback.
5
Adjust the volume on this unit.
Playback controls
If the BLUETOOTH device supports AVRCP (Audio
Video Remote Control Profile), you can control
playback via this unit in the same way as disc
playback.
To match the volume level of the
BLUETOOTH device to other sources
You can reduce the volume level differences
between this unit and the BLUETOOTH device.
During playback, touch
Select a level from –8 to +18.
14
GB
.
.

Searching and Playing Tracks

Using repeat play and shuffle play
1
During playback, touch
(shuffle) repeatedly until the desired
option appears.
Repeat or shuffle play starts.
Available play modes differ depending on the
selected sound source.
Note
Shuffle play is not available for the following discs:
 DVD-R/DVD-R DL/DVD-RW in VR mode.
 version 2.0 VCD with PBC function.
Using direct search play
1
During playback, press the number
buttons on the remote commander to
enter an item (track, chapter, etc.)
number, then press ENTER.
Playback starts from the beginning of the
selected point.
Note
During VCD playback, this function is available only
when playing a VCD without PBC functions.
Searching for a track by the main chorus
part (ZAPPIN™)
ZAPPIN helps you to find desired song by playing
back only the main chorus part of that song in a
playlist of the iPod/USB device. The playback time
can be adjusted in the option menu (page 16).
This function is convenient, for example, when
searching for a track in shuffle or shuffle repeat
mode.
Notes
 The tracks in the USB device need to be analyzed by
12 TONE ANALYSIS.
 The tracks in the iPod are played back from 1 minute
into each song.
1
During audio playback, touch [ZAP].
In the case of USB Music, ZAP mode starts from
the currently playing track.
In the case of iPod, ZAP mode starts from a
passage in the next track.
2
Touch [ZAP] when a track you want to
listen to is played.
In the case of USB Music, playback returns to
normal from the current position until the end
of the track.
In the case of iPod, the selected track plays from
the beginning.
(repeat) or