LG WDN12515BD Manual Del Propietário página 18

H ow to use washer
The LED display shows the settings, estimated time remaining, options, and status messages for your
washer. When the washer is turned on, the display will illuminate.
To Add Cycle Options to a Cycle:
❶ Turn on the washer and turn the cycle
selector knob to select the desired cycle.
❷ Use the cycle settings buttons to adjust the
settings for that cycle.
❸ Press the cycle option button(s) for the option
you would like to add. The cycle option
buttons will light when selected.
❹ Press the START/PAUSE button to start the
cycle. The washer will start automatically.
NOTE: To protect your garments, not every
wash/rinse temperature, spin speed, soil level, or
option is available with every cycle. See the
Cycle Guide for details.
BEEPER
TUB CLEAN
can lead to a mildewy or musty smell. The TUB
CLEAN cycle is specially designed to remove
this buildup. Add liquid chlorine bleach to the
bleach Compartment. After the cycle has ended,
open the door and allow the drum interior to dry
completely.
18
CYCLE OPTIONS BUTTONS
Adjusts the end-of-cycle
beeper volume or turns it
off.
A buildup of detergent
residue can occur in the
wash tub over time and
NOTE: Do NOT use this cycle with clothes, and
do NOT add detergent or fabric softener.
NOTE: If you use the TUB CLEAN cycle on a
monthly basis, the wash drum will be kept clean.
DELAY WASH
to delay the start of the wash cycle. Each press
of the button increases the delay time by one
hour, up to 9 hours.
RINSE+SPIN
can be helpful in preventing fresh stains from
setting in fabrics.
To activate the Rinse+Spin cycle:
❶ Press the ON/OFF button to turn on the
washer.
❷ Press the RINSE+SPIN button.
❸ Press the START/PAUSE button.
Once you have selected
the cycle and other
settings, press this button
Select this option to rinse
and spin a load separately
from a regular cycle. This