3M Filtrete Standard Guía De Uso Y Cuidado página 3

• Where a booster pump is installed on a water
system, you MUST maintain and inspect the
attached pressure switch regularly in accordance
with the booster pump manufacturer's
instructions. Contact a plumbing professional
if you are uncertain how to maintain your booster
pump system.
• Where a booster pump is installed on a water
system, you MUST install an appropriate
pressure relief valve. Pressure relief valve must
be maintained and inspected every 6 months.
Contact a plumbing professional if you are
uncertain how select/install/maintain a pressure
relief valve.
• Where a booster pump is installed on a water
system, you MUST install an appropriate pressure
regulating valve and regulate water pressure to
<80psi. Contact a plumbing professional if you
are uncertain how select/ install/maintain a
pressure regulating valve.
• DO NOT install in direct sunlight or outdoors.
• Place filter in such a position as to prevent it from
being struck by other items used in the area of
installation.
• Ensure all tubing and fittings are secure and free
of leaks.
To reduce the risk of water leakage or flooding, and to ensure optimal
filter performance:
• Change the disposable filter every six months or sooner if you observe a noticeable
reduction in water flow rate.
IMPORTANT NOTES
• Failure to follow instructions will void warranty.
• Install with the inlet and outlet ports as labeled. Make sure not to reverse connections.
PARTS AND MATERIALS:
(A)
(B)
(C)
• DO NOT install unit if collet is missing. Contact 3M
• Use compatible flexible tubing with "push-in
• DO NOT install with rigid piping (such as copper,
(included)
(D) (E)
(J)
3
if collets are missing from any fittings.
connections" (such as PEX tubing, PE tubing,
PP tubing)
aluminum, stainless steel, chrome plated, or
anodized tubing).
(F) (G)
Filter (3US-AF01, 3US-PF01, or 3US-MAX-F01) (A)
Filter head assembly (B)
2 – 3/8" blue tubing (C)
3/8" male water supply line adapter (D)
3/8" compression hex nut (E)
3/8" ferrule (F)
3/8" tube insert (G)
Time strip (H)
Command Mounting Strip (I)
™
Filter holder (J)
(H) (I)