Product Setup; Setup Wizard - D-Link MYDLINK DNR-312L Guía De Instalación Rápida

PrOdUCT SETUP

SETUP WIZARD - Windows
Step 1:
Connect the included Ethernet cable to the network cable connector located on the rear panel of the
DNR-312L and attach it to the network.
Step 2:
Attach the external power supply to the DC power input connector located on the rear panel of the
DNR‑312L and connect it to your wall outlet or power strip. Power is confirmed when the green
LED Power Indicator located on the front panel is lit.
Step 3:
Insert the DNR-312L installation CD in the CD-ROM drive. If the CD Autorun function does not
automatically start on your computer, go to Start > Run. In the run box type D:\autorun.exe (where D:
represents the drive letter of your CD-ROM drive) and click OK. When the autorun screen appears,
click Install and follow the on-screen instructions.
Step 4:
Click on the Start button to start the wizard, and follow the instructions from the Installation Wizard to
finish setting up your NVR.
4
DNR-312L