Technical Specifications - DRESTER PowerWash Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
RUNNING-IN
When the machine is new, the surface of the pump and pipes will wear and fragments from the manufacture of the
granula will liberate themselves. An extra change of water and rinse of the machine after 100 washes is therefore strongly
recommended. The granula should then also be rinsed while they are collected in the basket.
DETERGENT
HEDSON TECHNOLOGIES AB offers a detergent as an option. This detergent is developed specifically for this Wheel
Washer in order to minimize the risk of developing foam. The detergent can be ordered using the number BIO-291. It is
delivered in packages of 5 kg, and you will need approx. 100-200 ml per 100 l of water (i.e. 200-400 ml for one full
machine).
HEDSON TECHNOLOGIES AB will not accept any responsibility or warranty claims what so ever for poor washing
result, operational disturbances or damages on the machine like for instance corrosion, caused by the use of non
approved detergents or chemicals in connection with the Wheel Washer. Furthermore, HEDSON TECHNOLOGIES AB
is not responsible for the safety of the machine (declared through the CE label) when other detergents or chemicals are
used.
GRANULA
The granula mixture is carefully designed by HEDSON TECHNOLOGIES AB to give the best possible washing result
without damaging the rims. It has specially adapted floating properties, degrees of hardness and wearing qualities.
HEDSON TECHNOLOGIES AB will not accept any responsibility or warranty claims what so ever for poor washing result
or operational disturbances in the machine, for instance blocked pipes caused by the use of non approved granula in
connection with the Wheel Washer. Furthermore, HEDSON TECHNOLOGIES AB is not responsible for the safety of the
machine (declared through the CE label) when other granula are used.
The granula should be replaced altogether once a year (or after 10.000 wash cycles).

TECHNICAL SPECIFICATIONS

Producer:
Machine model:
Weight:
Electrical connection:
Compressed air connection:
Water volume:
Maximum wheel weight:
Maximum wheel size:
Minimum wheel size:
Sound pressure level:
Sound power level:
GUARANTEE
HEDSON TECHNOLOGIES AB provides guarantee under the condition, that the machine is used and maintained
according to the instructions. The guarantee is valid for one year, or up to max. 8000 washing cycles. The guarantee
covers only the change of parts to new spare parts and is not valid for repairing work. Always state the machine number
and manufacturing year when claiming the guarantee or ordering spare parts. This data can be found on the silver
coloured plate in the motor room. Do also state the date of purchase at the same time.
INSTR: 14899
HEDSON TECHNOLOGIES AB
Hammarvägen 4
SE-232 37 ARLÖV
SWEDEN
POWERWASH
180 kg
According to manufacturing label of the machine
max 13 bar (200 psi)
210 litres
35 kg
800 x 305 mm
560 x 135 mm
79 dB (A) measured at a distance of 1 meter
94 dB (A)
REV: 091208/Bom
GODK:
SID: 3 / 49

Publicidad

Tabla de contenido
loading

Tabla de contenido