Chevrolet Malibu 2008-2012 - Metra 99-3302 Instrucciones De Instalación

Chevrolet Malibu 2004-2007
(Figure E)
(Figure F)
Dash Disassembly 99-3302
5. Unclip and remove side panel from passenger side of dash with door
open and remove (2) 7 mm screws from behind panel. (Figure E)
6. Remove (2) 7 mm screws from bottom of glove box then open box
and squeeze sides together to open further and remove the remaining
(4) 7 mm screws. Unclip the black vent cover under the glove box then
unclip and remove entire glove box assembly. (Figure F)
7. Unclip and remove trim panel surrounding radio and climate controls.
(Figure G)
8. Remove (4) 7 mm screws securing the radio and (2) 7 mm screws
securing the climate control. Unplug and remove the radio. (Figure H)
Continue to kit assembly
(Figure G) (Figure H)
6
Chevrolet Malibu
2008-2012
1. Unsnap and remove shifter trim. (Figure A)
Note: Start around shifter and be sure to pull down
before back because this panel slides up under the
radio/climate panels.
2. Remove (2) 8 mm screws from bottom of
radio/climate panel.
3. Unsnap and remove the climate/radio panel
and upper vent trim panel together. They can be
separated after removal. (Figure B,C)
4. Remove (6) 8 mm screws from radio and
climate controls.
Continue to kit assembly
(Figure A)