Kit Assembly; Din Mount Radio Provision - Metra 99-3302 Instrucciones De Instalación

1. Slide the DIN cage into the Radio Housing and
secure by bending the metal locking tabs outward.
(Figure A)
Note: The spacer included in this kit can be used
between the radio housing and the DIN cage for
vehicles with shallow cavities if necessary.
(Figure C)
2 Slide the aftermarket radio into the cage until it
snaps into place. (Figure B)
3. Locate the factory wiring harness in the dash.
Metra recommends using the proper mating
adapter from Metra or AXXESS. Re-connect the
negative battery terminal and test the unit for
proper operation.
4. Aura, Cobalt, G5, HHR, Sky and Vue only:
Cut and remove top mounting tabs on each side
of the Radio Housing. (Figure D)
5. Reassemble dash in reverse order
of disassembly.

Kit Assembly 99-3302

DIN mount radio provision

Note: Refer also to the instructions included with the aftermarket radio.
(Figure A)
(Figure C)
12
(Figure B)
Cut top two holes off
(Figure D)