Steren BAF-1285 Manual De Instrucciones página 19

2. CONTROLS
1. MIC1 INPUT control: use this control to set the volume level of the microphone (6.3mm
or balanced).
2. Microphone input: allow to connect a balanced microphone with Cannon or 6.3mm con-
nector.
3. Volume control MIC2: use this control to set the volume level of the second microphone
(6.3mm).
4. MIC 2 : allow to insert a second microphone with 6.3mm connector.
5. LINE INPUT control: use this control to set the volume level of the line-In signal.
6. LINE INPUT: use these RCA and Cannon inputs to connect an external audio device CD,
MP3 player, DVD, mixer, etc.
7. Treble: use it to set the treble level.
8. Bass: use it to set the bass level.
9. General volume control: use this control to set the general volume level.
10. Signal output: use this jack to connect other non-amplified speaker in cascade, using
a speakon connector.
11. Power indicator.
12. Overload indicator: when the volume is very hard this LED will activate. In this case
please reduce the volume level.
13. On / Off power switch.
14. AC power: Use it to connect the AC power cord.
15. Fuse.
16. At the bottom of the speaker there is a hole to place a stand.
17. IR detector
6 6