Instructions - Steren BAF-1285 Manual De Instrucciones

3. INSTRUCTIONS

Make all initial connections with the power switches OFF on all devices. Make sure
volume level are all the way down, you can adjust it later.
3. Use the RCA line in input jacks in order to connect
a CD, MP3, DVD, mixer or other type of audio device.
To avoid damages in the BAF-1285 and to obtain
a good sound quality you should adjust the volume
of your amplified audio source (ipod, MP3, DVD, etc.)
between 50% to 70% level.
1. Connect the power cable to the electric outlet and connect the
other end of the power cable to the speaker.
2. Connect a microphone to the input jack labeled MIC IN through
the 6.3 mm plug or Cannon plug.
4. Power all the devices on. A green LED indicator light will
illuminate indicating that the speaker is powered on.
9 9