Steren BAF-1285 Manual De Instrucciones página 23

6. The red LED indicator light will illuminate if an overcharge
is detected. This occurs in order to protect your speaker. The
volume levels should be reduced in order to prevent serious
damage to the speaker.
Connection
IMPORTANT NOTE: If you use the amplified output, avoid to use the volume control (line and
master) up to 80% of the capacity, because when the impedance get down, the speaker box
automatically will protect the circuits and stops the audio output signal. In this case, turn the speaker
off and disconnect to the outlet. Then plug it in and turn it on.
10 10
5. Adjust the volume levels of the connected devices (CD, MP3,
etc.) as well as the line in level on the speaker. Also adjust the
Bass and treble levels in order to equalize the sound.
3. INSTRUCTIONS