CHARGER FRONT
CHARGER BACK
Carrying
Handle
Self-Test Procedure: Each time pump is turned on, the microprocessor initiates
a self-test procedure. Audio alarm, visual displays, and readout (8888) turn on for
5 seconds. If the self-test fails, F1 may appear. If this happens, DO NOT USE THE
PUMP; SERVICING IS REQUIRED.
Flashing Displays: Three flashing visual displays indicate the need for immediate
attention:
•
EMPTY
•
OCCL
•
LOW BATTERY
Pump/Charger
Connector
Pump Release
Latch
Power Cord
7
Pole Clamp
Knob
Pole Clamp