Display; How To Use - Bigben PS1AC Manual De Instrucciones

Display

How to Use

1) Setting the Clock
1.1: Press the `Clock Set' button and the display will show `24H' for a 24 hour time format. If you
want a 12 hour time format then press the `Up' or `Down' button to select it. When you have chosen
between 12 & 24 press the `Clock Set' button again and the first two digits, of the display, will flash.
Press `Up' or `Down' to select the HOUR. Press `Clock Set' again and the second two digits will
flash. Press `Up' or `Down' to select the minute(s).
Continue to press 'Up' or 'Down' to set the year, then press 'Up' or 'Down' to set the "day-month",
When you have chosen, press the `Clock Set' button again to store your selection.
2) Setting the Alarm
2.1: Press the `Alarm 1' button. The display will go show 00:00 and the first two digits will flash.
Press `Up' or `Down' to select the HOUR. Press the `Alarm1' again and two digits will flash.
Press `Up' or `Down' to select the minute(s). Press the `Alarm1' button again to select alarm
sound. The display will show `S-1' and you will hear the alarm `chime'. Press `Up' and the
display will show `S-2' for you to hear the alarm `chime'. Press `Up' again and the display will
show `S -3' & you will hear the alarm `chime'. Press `Up' again until you have selected your
desired `chime' and press the `Alarm1' button to store your selection.
2.1.2 When we set up the alarm, projection function will be off.
1. Long press "Alarm 1" , the display will show 00:00.
Press "UP / Down" to set the Hour. Press "Alarm 1" to confirm the Hour
Press "Up/ Down" to set the minutes. Press "Alarm 1" to confirm the minutes.
2. Unit will go to sound output selection. Screen will show 3 music "S-1, S-2, S-3" for users to
select.
Press "Alarm 1" to confirm the music. Screen will show the selected song.
Unit will go to sound level selection. Press "Up/Down" to adjust the alarm volume & "Alarm 1" to
confirm.
3. Unit will go to projection On/Off section. Press "Up/Down" to select the projection On(P O) or
CLOSE(P C) .
When "On" is selected, alarm will ring at the selected time together with projection.
When "CLOSE" is selected, alarm will ring at the selected time without projection.
4. Unit will go to weekly schedule setting. Press "Up/Down" to select.
Display shows (1-7) alarm will ring every day from Monday to Sunday
Display shows (1-5) alarm will ring from Monday to Friday.
Display shows (5-7) alarm will ring weekend from Friday – Sunday only..
Display shows the single day (X), alarm will ring on the exact selected day weekly.
Press Alarm1 to finish the setting.
5.Unit will return to normal clock status
To set Alarm 2, press "Alarm2" & repeat the above steps.
3) Set SDR (Special Date Remainder)
3.1:Setup SDR almost same as alarm setup
• To set SDR, press and hold [SDR], "SDR" icon and firs digit flashing for MONTH value input,
1
2
3
4
5
6
7
8
- EN 4 -
Main Digit
Special Date Remainder
Nap
Snooze
Alarm 1
Alarm2
Light Effect
PM indicator