Denwa iP Access Manual Del Usuario página 26

Maximum number of dialed digits
iP Access can originate a call in three different ways:
• Dial to an extension number (if it is connected to an IP PBX)
• Call directly to an IP address, or
• Call to an extension number dialed by user (like a common telephone)
In the last case, the iP Access ends the dialing by time (4 seconds) or when the maximum
number of dialed digits is reached (which corresponds to the extensions numbering plan of
the IP PBX).
Action of key X or button X
The iP Access can be equipped with:
• Telephone keypad
• Simple buttons (1 or 2)
• Telephone keypad and simple buttons
The telephone keypad has the keys , 0 to 9, * (asterisk) and # (pound)
The action of all keys is programmable in the same way:
• Digit
Generates a one digit dialing (like in a common telephone) which will serve to
compose an extension number.
• Call to extension
Shoots the call directly (one touch) to an extension number
• Call to IP address
Shoots the call directly (one touch) to an IP address.
The action of buttons is programmable in the same way as keys, but with the adding of this
action:
• Manual Door opening
It is useful to connect an external button (tipically in reception desk). When this
button (external to iP Access) is pressed, door is opened. It doesn"t care if it is in a
middle of a call or it is idle
Last said is what is programmed with the Action of key X or Button X element to
program.
After programming the action of the key or button , the element
programmed; this determines which digit, extension number or IP address is issued when
this key or button is pressed (in case of Button programmed as Manual Door opening,
which relay is activated when the button is pressed. Remember that relay no 2, may work
as normal open or normal closed, depending the connection of a mini jumper in PCB)
For programming of the dialing digits, the values 0 to 9 are used to numbers, 10 is used
for * (asterisk) and 11 for # (pound) if this dialing is required.
Página 26 de 33
Manual de Portero IP v 8.0
DENWA IP Access
Versión de software (desde) 3.17
Prog Key X / Button X
is