Denwa iP Access Manual Del Usuario página 30

Relays programming
In the submenu:
Relay 1 mode
Relay 2 mode
Activation modes of relay, once received activation order
The different values are:
Normal mode (door opener)
•
The relay closes when remote order is received. It is the regular functioning mode.
Alarm NA mode
•
The relay closes for programmed time, when a key or button is pressed.
Alarm NC mode
•
The relay opens for programmed time, when a key or button is pressed.
Last two modes are complementary and they are useful for activate an alarm and/or
camera, when iP Access starts to be operated for the visitor (if it is 1 button call,
the alarm is simultaneous with the call, if is telephone keypad, when the visitor
begins dialing)
Activation time of relay 1 (in seconds)
Activation time of relay 2 (in seconds)
Activation time of relay, upon activation order is received. This item can also be found in
Timers
menu .
you can see the following elements to program:
Página 30 de 33
Manual de Portero IP v 8.0
DENWA IP Access
Versión de software (desde) 3.17