Software Upgrade - Denwa iP Access Manual Del Usuario

Software Upgrade

The submenu:
New version: XXX (file ipax.XXX)
Firmware for upgrading is located in file which name is ipax.XXX, where XXX are 3 digits
from 000 to 999. This field must be set with 3 digits according to new version to install to
iP Access.
TFTP server IP Address
The file with firmware to upload, must be located in a TFTP server, and his address must
be set in this field.
At footpage, there is a button for launching upload:
• UPGRADE:
Whenk click on this button, the uploading process is launched.
NOTE: When upload is finished, the iP Access takes more than 1 minute to proccess new
firmware.. DO NOT UNPLUG POWER SUPPLY AT THIS TIME
For technical assistance:
+54-351-571-6300
+54-11-5273-3406
+56-2-581-2398
+51-1-708-9309
contains the following elements
support@denwaip.com
Página 33 de 33
Manual de Portero IP v 8.0
DENWA IP Access
Versión de software (desde) 3.17