Comunication Parameters; Passwords - Denwa iP Access Manual Del Usuario

Manual de Portero IP v 8.0
DENWA IP Access
Versión de software (desde) 3.17

Comunication Parameters

In submenu : you can see the following elements to program.
Parameters that will be used by IP Access for the communication.
My IP address (iP Access)
Is the IP address that will have the IP Access for all IP communications.
Its value by default is 10.0.0.100 . If you change this address, the following accesses to
programming webserver, will have direct to: http://new_address:8085
My UDP SIP Port
Is the UDP port number that use the iP Access for the SIP protocol.
Login password of iP Access in IP PBX
Is the password that uses iP Access to log at the IP PBX, if its registration is required

Passwords

(this item can be also programmed in menu )
Página 27 de 33