Real Flame 1726LP Manual Del Propietário página 8

ASSEMBLY INSTRUCTIONS
3.) Place propane tank in the metal ring inside the fire table body. Tighten down the screw
on the side of the tank seat to secure the propane tank.
4.) Connect the LP Gas Tank
Before connection, be sure there is no debris caught in the collar
of the gas cylinder, the regulator valve or the burner and burner
ports.
Connect the gas line to the tank by turning the connection knob
clockwise. Hand tighten only.
To disconnect the LP tank, make sure the valve on the LP gas tank
is completely closed.
Disconnect the connection knob by turning it counter-clockwise
until it is detached from the valve.
8