Standard Package Contents; Getting Started; Battery Status Indicator - Mangar International Airflo Mk3 Instrucciones De Uso

A
A
Simple solutions for everyday independence
Standard Package Contents - fig. 1
1 x Airflo compressor fitted with one
12v - 2.3Ah battery (A)
1 x Battery charger (B)
B
1 x 2-Way hand control (C)
1 x User instructions

Getting Started

The Airflo does not have an 'on/off' switch.
To operate the compressor or activate the Battery
Status Indicator, connect the hand control and
momentarily press either the 'Up' or 'Down' button.
C If the Airflo is not used for approximately 5 minutes
it will go into 'sleep' mode and the battery status
indicator light will go out.
1
Battery Status Indicator - fig. 2
Before use, check that the battery is sufficiently
charged (see 'Getting Started'). If the battery is
fully charged, the indicator light (A) will show a
steady Green light.
Steady Green = Fully charged.
Flashing Green = Recharge soon.
Steady Red = Recharge immediately
Flashing Red = Over temperature cut-out
NOTE: If charge is too low the 'down' button on
the hand control will not work.
The Airflo needs to be recharged when the indicator
light is flashing Green.
2
Charge the battery overnight before first using
the Airflo.
Airflo Mk3
(will not deflate).
(will not deflate or inflate).
3