Operating Condition - Leister GROOVER Manual Del Usuario

Description of tool
16
17
10
1. Power supply cord
2. Operating switch
3. Locking button of operating
switch
4. Cutting speed switch
5. Handle
6. Hand rest
7. Scale for depth adjustment

Operating condition

• Adjust the tracking wheel (11) with spacers (12) to the pitch as required when using nap-rolls, or tiles.
• Fit the ejector pipe (16) and dustbag (17).
• Adjust the groove depth.
– With your left hand push down the handle (5) of the drive unit up to the magnet stop.
– With your right hand on the control knob (8) adjust the required groove depth until approx. 3/4 of the
material thickness is visible on the scale.
• Caution: Cutting blade can protude!
• Align the tool along the grooving line via the adjustable guide roller (9) and the red positioning arrows (22).
Pay attention to the direction of cutting !
12
6
22
14
18
8. Control knob for depth adjustment
9. Adjustable guide roller
10. Rear roller
11. Tracking wheel
12. Spacers
13. Roller axle
14. Cutting blade cover
15. Threaded connection
5
8
4
15
22
3
2
19
1
7
20
16. Ejector pipe
17. Dustbag
18. Air inlet openings
19. Motor housing
20. Adjustment screw for
guide roller
21. Locking screw
22. Positioning arrows
12 11 13
9 21