Operating Instructions; Grooving Machine; Technical Data - Leister GROOVER Manual Del Usuario

Operating Instructions

Please read operating instructions carefully before use
and keep for future reference.
Leister GROOVER

Grooving machine

Application
• Cutting welding grooves into floor coverings of:
tiles,
rolls,
nap-tiles and -rolls

Technical Data

Voltage
Frequency
Power consumption
Cutting speed
Noise emission level
Sound pressure level
Vibration acceleration
Groove depth adjustment mm
Weight
Size
Mark of conformity
Mark of approval
Protection class II
Technical data and specifications are subject to change without prior notice.
The stated vibration acceleration has been measured using a standardised test procedure, and can be used
for comparison of one electrical tool with another. It can also be consulted to give a preliminary assessment
of the vibrational loading.
The times when the equipment is switched off or is running whilst not actually being used can considerably
reduce the vibrational loading over the entire working period.
(Translation of the original operating instructions)
V~ 120, 230
Hz 50 / 60
W 350,
rpm Pos 1: 14 500, Pos 2: 18 000
L (dB) 89 (K = 3dB)
pA
L (dB) 100 (K = 3dB)
WA
a (m/s 2 ) < 2.5 (K = 1.5m/s
h
0 – 4, infinitely
inch 0 – 3/16
kg 6.4 } without power supply cord
lbs 14.1
mm 240 205 255
inch 9.4 8 10
2
3
4
700
2 )
GB
9