ASSEMBLY INUMBRINA DIRECTLY TO THE FLOOR
WHAT YOU NEED
1 person
+/- 30 min.
USE
1.
2.
4
assembly directly to the floor - on base plate - into abachus
To close the parasol again, take the
rope out of the tube and hold it in
TIP
a slight angle.
: keep the rope
aslope until the parasol is completely
closed.
1. Position the stainless steel anchor tube where
you want to install the parasol. Fix it tightly
to the ground using anchor bolts (or other fixing
mediums adapted to the surface in question.
2. Insert the Inumbrina parasol in the anchor
tube and fasten it by turning the adjusting screw
clockwise. Always tighten the adjusting screw
until the Inumbrina can no longer revolve on its
axle.
1. To open the parasol, firmly pull the rope until the
parasol fabric is almost completely horizontal.
2. To put the rope in the tube, you should fold it
in 2 and put the loop in the hole until it is
completely tucked away.