koban KDP6 Manual Del Usuario página 35

• Fix it onto the ceiling refer to
step 3.3.1.1 - 3.3.1.4.
• Desired detection angle can
be reached by detector head
adjustments after ceiling mount
finished.
• Detector head can be adjusted
downward max. 28º vertically
(See FIG 15-A) to shorten the
detection range, or turned
leftward and rightward max. 25º
horizontally (See FIG 15-B).
• It must be careful to ensure that
aiming leftward hollowness A
(See FIG 15-C) at the inner cover
edge horizontally (See FIG 15-D),
and also make sure rightward
hollowness B (see FIG 15-E) at
the inner cover edge horizontally
(see FIG 15-F) in order to obtain
optimum detection range.
NOTE
To rotate anti-clockwise 180º of
detector head for wall mount (See
FIG 16).
www.grupotemper.com
Wall presence detector
Instructions manual |
KDP6
35