Zoeller 1263-0001 Manual Del Usuario página 6

INSTALLATION INSTRUCTIONS
4. Place the pump inside the basin with the switch
positioned away from incoming water.
5. Be sure the float switch is at least 1 in. away from the
side walls of the basin and free of any obstructions
through the full range of switch motion.
6. Install rigid 2 in. discharge pipe (not included) according
to local, regional, and state codes.
4
5
6
6
© 2020. All rights reserved.
Incoming
water
Switch
Switch
1 in.
Minimum
Discharge
Pipe