Description And Components Location - Pentair SIATA V132 SFE-EV VIRIDION Manual De Instrucciones

User Guide Siata V132-SFE-EV
3.3.

Description and components location

DOWN button
REGEN button
3.4. Bypassing
If the system is equipped with a bypass and if a problem occurs, turn the valves to bypass the system as shown in the picture
below.
Out
4 . Programming
Mandatory:
default).
A Note:
The controller must be plugged to be programmed.
After 30 seconds without a button press, the unit returns to normal operation.
A Note:
Menus are displayed in a defined and incremental order.
While the parameters are being edited, the
Entering password.
A
Press to enter the menu.
B
Use to modify the digit and
C
Press to validate the password.
Changing the password.
A
Press repeatedly until the display shows
B End
While the message
C
Use to modify the digit and
D
Press to validate the new password.
Current time
A
Adjust the current time using
B
Press to validate and switch to the next parameter.
6 / 28
LCD display
UP button
Long manifold
Injector
Twin pilots
Normal
operation
In
The access to the controller operating parameters requires the input of a 4-digit code (0000 by
to pass to the next digit.
End
is displayed, press once
to pass to the next digit.
to modify the digit and
External pilot connections
Out
icon is on and blinking.
.
only.
to pass to the next digit.
Short manifold
Inlet
Injector
Drain
Outlet
In Bypass
Ref. MKT-UG-009 / A - 21.12.2016
Meter
In