Troubleshooting - Black+Decker POWERCRUSH BL1275BGFP Manual De Uso Y Cuidado

CA R E A N D C L E A N IN G
This product contains no user serviceable parts. Refer service to qualified
service personnel.
1. Before cleaning, turn off and unplug the appliance.
2. If using blending jar, lift the blending jar by the handle off the base.
3. Remove jar base by turning it counterclockwise until loose.
4. Remove the blade assembly.
Caution: Blades are sharp. Handle carefully.
5. Remove lid.
6. Wash removable parts by hand or in the dishwasher. Place the jar on the
bottom rack and the rest of the parts on the top rack only.
• Rinse removable parts immediately after using appliance for easier
cleaning.
• Completely disassemble blender or food processor attachment parts
before washing.
• All removable parts can be washed by hand in hot water with dish soap or
in the dishwasher, top rack only. Hand-washing of plastic parts will help to
maintain the appliance's appearance.
• Do not use rough scouring pads or cleansers on any plastic or metal parts
to clean.
• Do not allow blade or disc to soak in water for long periods of time.
• Remember to clean the internal shaft of the chopping blade. Use a brush
to remove any residual food particles.
Important:
• Do not place the parts in boiling liquids.
• Do not immerse the base in liquid. Wipe the base with a damp cloth and
dry thoroughly.
• Remove stubborn spots by rubbing with a damp cloth and nonabrasive
cleaner.
Note: If liquids spill onto the base, wipe with a damp cloth and dry thoroughly.
Do not use rough scouring pads or cleansers on parts or finish.
T RO U B L E S HO OT IN G
Problem
Blender is
having difficulty
blending
Blender stops/
goes into
STANDBY mode
10
Possible Cause
Mixture is too thick or
air bubble has formed
between mixture and
blade.
Blending time exceeds
2.5 minutes.
Solution
Turn blender off. Use rubber spatula
to scrape down sides of jar and
redistribute, pushing food towards
blades. Add more liquid.
Re-select appropriate speed
setting to start blender.