JANE TRANSPORTER Manual De Instrucciones página 21

1 Prior adjustments
Changing the position of the handle
The carrying handle has 2 positions (figure 1a), each one of them has
a specific function:
Position 1: Hood folded.
Position 2: Carrying position. Position for fitting and removing the ca-
rrycot from a JANÉ chassis and for carrying, as well as for use in the
vehicle.
To change the position, press the double safety catch and then the
lever on the handle and turn the handle to the required position.
Reclining the backrest
The backrest of the new TRANSPORTER carrycot can be automatically adjusted
using the adjustment device. There are two clear different positions (Fig 1b):
AUTO Position: The backrest will always be in the lowest position, with
the baby always lying down during the journey. (1)
STROLLING Position: The backrest can be reclined by up to 20º when
it is installed on your JANÉ pushchair or out of
the car.(2)
Ventilation channels
Your TRANSPORTER safety carrycot has two types of ventilation chan-
nels to improve the breathability of the product and the comfort of
your baby:
Side ventilation channel. Fitted with a membrane to prevent the wind
and cold from entering, while at the same
time allowing the inside of the carrycot to
breathe.
Lower ventilation channel. Pressing the button on the lower part of
the head area gives you two extra venti-
lation channels for the hottest seasons.
(Fig 1c)
21