Technical Parameter Table Of Air Compressor - SATA AE5801 Manual Del Uso

XIV. Technical parameter table of air compressor
AE5801 2.2 3
AE5802 4 5.5
AE5803 7.5 10
The company continuously researches and improves the products, and reserves the right to make design (such as
specification) changes without prior notice.
Please make careful selection before purchasing, so as to avoid trouble when you use it.
•Determine the operating pressure MPa: Select the operating pressure by summing up the actual operating pressure, the
pressure in air delivery line, the pressure in purification system, pipeline leak pressure, etc.
•Determine the displacement m3/min: The selection of displacement shall take into account the air service cycle, the
maximum air volume at the peak, the storage volume, and possible leakage for future expansion plans. Generally, it shall
be 20% more than the actual amount.
•Determine the supply voltage: Select the one-phase or three-phase model according to the regional power supply
situation. If the power supply allows, the three-phase model is preferred.
•After the above three points are determined, refer to the technical parameters for model selection.
•The above instructions will help you to choose the right model. If you have any questions, please feel free to contact us.
We will provide you with timely technical support and complete service.
AE5801/AE5802/AE5803
65x2 46
90x2 60
90x3 70
中文
EN
0.25 0.8 100
0.48 0.8 125
0.9 0.8 190
DE RU KO PT JA ES
105x43x76 80
126x43x86 155
144x49x93 210
35