SATA 97204A Manual Del Uso página 6

2） Or pull the driven handle back to the appropriate position at the tail of the gun barrel, unscrew the gun head and barrel, and push
the iron core pull handle into the gun body by pressing the locking piece at the tail of the gun barrel.
3） Try to shoot the grease gun several times. If grease cannot be discharged, repeat the above actions 2-3 times until the grease is
discharged visually and normally.
4） Lock the gun head and barrel.
5） Press the exhaust button gently and release the button until grease is discharged.
This phenomenon is relatively common while using bulk grease:
Question:
There is grease leakage at the locking position of fittings at the grease outlet of the grease gun.
Reason:
Fittings are not properly locked.
Resolution:
1 ） The thread at the grease outlet of the grease gun is skew thread, which adopts excellent special leak-proof design. The deeper it is
screwed in, the more excellent leak-proof function it can play.
2） The fittings for above tools should be properly locked. Excellent leak-proof function can be played by avoiding locking them by hand.
Operation instruction of manual grease gun:
Gun head
Gun body
6
97204A
Iron core pull handle
Gun body
中文
Grease pellet
Rubber plug
EN DE RU KO PT
Bulk grease drum
JA ES