Cleaning The Filter; Troubleshooting - WAGNER WoodPerfect Manual Del Usuario

Cleaning the Filter:

IMPORTANT: Before every use, you should
inspect the air lter in the turbine to see if it
is excessively dirty. If it is dirty, follow these
steps to replace it.
IMPORTANT: Never operate your unit
without the air lter. Dirt could be sucked in
and interfere with the function of the unit.
PROBLEM
Problem A: Little or no
material ow
Problem B: Material
leaking
Problem C: Spray pattern
too thick, runs and sags
Problem D: Spray jet
pulsates
Problem E: Too much
overspray
Problem F: Pattern is very
light and splotchy
This unit contains no servicable
electrical parts. Do not attempt to
service yourself. Store indoors with
the cord wrapped around the turbine
handle.
English
10
Maintenance

Troubleshooting

CAUSE SOLUTION
Have you tried the recommendations
above and are still having problems? In
the United States, to speak to a customer
service representative, call our Technical
Service at 1-800-328-8251. See www.
wagnerspraytech.com in the "Contact Us"
section for Technical Service hours.