Installing The Ceiling Arm - Derungs Dmed Triango 80 C Instrucciones De Montaje Y Funcionamiento

3.5

Installing the ceiling arm

WARNING
►
Injury hazard from spring balanced arm jumping
►
Do not remove the transport safeguard until after the
luminaire head has been installed.
B
A
C
Carefully turn the covers "A" and remove them from the
►
joint cover "B".
Loosen the screws "C" and remove the joint covers "B"
►
from the transverse boom.
D
Carefully remove the rotary plug "D".
►
►
Insert the ceiling arm into the ceiling tube.
A
After inserting the ceiling arm, first install the ring "A",
►
then the locking ring "B", followed by the end rings "C".
D
Carefully insert the rotary plug "D".
►
B
A
C
Attach the joint covers "B" and install the screws "C".
►
Insert the covers "A" and turn to secure.
►
►
To proceed with installation of the luminaire head, see
Chapter 6.
ENG
A
B
C
A
29